DuraVent PelletVent Pro Flat Ceiling Vertical Kits
Kit includes: Vertical Cap, Storm Collar, Ceiling Support Firestop Spacer, Adjustable Flashing, and Appliance Adapter. Pipe lengths not included. 4” Kit includes a 3”-4” Appliance Adapter/Increaser, painted black. Support Clamp included.
Order Item
| Item |
Size |
Item
# |
Price |
Weight |
Buy |
| 3 Inch DuraVent PelletVent Pro Flat Ceiling Vertical Kit |
3" |
Ocp25327 |
$332.49 |
17.5 lbs |
|
| 4 Inch DuraVent PelletVent Pro Flat Ceiling Vertical Kit |
4" |
Ocp25334 |
$357.49 |
20.9 lbs |
|
|
Please note: The DuraVent PelletVent Pro Pellet
Stove Pipe Kits will require extra parts such as straight pipe,
tees, elbows, etc. to complete an installation. These kits contain
parts to make installation to a specific situation easier. Always
plan your work and buy everything you need before beginning installation
to save time and headaches. |
| |
Additional Information
Installation Instructions
for Dura-Vent PelletVent Pro
Combustion Air System for PelletVent Pro Manual
Examples
and Diagrams of typical PelletVent Pro installations
Please note: For safety considerations
and ease of installation follow these guidelines:
1. Download and read the Installation
Instructions for Dura-Vent PelletVent Pro. This
manual will answer most questions regarding installation. Also
consult your pellet stove manual for specific information regarding
outside air or other issues specific to your pellet stove or
insert.
2. It is your responsibility to comply with all local fire codes
regarding installation of the stove, pipe and any options or
accessories. Read the stove or insert manual carefully regarding
assembly and installation. Always use common sense and
good construction/installation practices. If you feel
unsure about any installation issues we recommend you consult
with a licensed contractor, building official or fire marshall.
3. Never mix and match different brands of pellet stove
pipe. The connection will most likely differ from Brand X to
Brand Y and may cause leaks.
4. Never use "regular" single wall or double wall stove
pipe for pellet stoves or inserts. Burning pellets
causes a more corrosive environment and "regular"
stove pipe will not last.
5. In the United States the minimum clearance to combustibles
from PelletVent Pro is 1” for oil, pellet, corn
or other biofuel applications.
6. Sections of pipe are connected to each other by pushing them
firmly together and twisting. Screws are not required. However,
if screws are desired, use 1/4”-long sheet metal screws.
Important! Do not penetrate the inner liner with screws.
Return to top of page |
M&G DuraVent provides no warranty for the following professional
products if such products are not installed by a trained professional
installer: DuraTech®, DuraPlus HTC®, DuraChimney® II,
PelletVent Pro®, DirectVent Pro®, FasNSeal®, FasNSeal®
W2, FasNSeal® Flex, and PolyPro®, and M&G DuraVent’s
relining products including DuraLiner®, DuraFlex® (SW, Pro,
316, 304), and Ventinox®.
• Any M&G DuraVent product sold by a non-approved website
will not be warranted.
• Any customer that has bought product from a non-approved
website will not be given technical assistance or support from M&G
DuraVent.
• Any website not compliant with this Internet Sales Policy
shall not use M&G DuraVent’s trademarked and registered
properties, and will be notified to remove them immediately. DuraVent
reserves the right to enforce its intellectual property rights against
entities not in compliance with this Internet Sales Policy. |
 |
