Description of available pieces
Straight Pipe - Use for a single-wall
connector pipe. Requires 18” clearance to combustibles.
45 degree Elbow - Offsets obstructions as needed.
Elbows angles are now adjustable. Adjustable elbows are manufactured
drip free so creosote travels back to the stove as intended.
90 degree Elbow - Offsets obstructions as needed.
Elbows angles are now adjustable. Adjustable elbows are manufactured
drip free so creosote travels back to the stove as intended. Not
recommended for rear exit appliances.
Damper Section - Install at, or close to, the stove
outlet in-line. 5” pipe section with the damper pre-installed.
Double-Skirted Stovetop Adapter - Use to adapt
DuraBlack stovepipe to appliance flue outlets. Outer wall covers
appliance flue outlet.
Slip Connector - Use to adapt DuraBlack pipe to
ceiling support box or finishing collar. Adds 3” - 13”
of length to rigid pipe. Allows drip-free
installation without cutting the pipe. Can be used in line to create
a telescoping combination when used with a straight length of pipe.
Snap-Lock Adapter with Trim - Snaps into the ceiling
support box or finishing collar and extends down to fit into stovepipe
for a drip-free connection to a DuraTech, DuraPlus, DuraPlus HTC,
or DuraLiner Chimney system. Provides a strong mechanical connection.
Adapter will work with all 6”-8” DuraPlus, 6”-8”
DuraPlus HTC, and 7”-8” DuraTech installations.
Adapter will work with 5”-6” DuraTech Ceiling Support
Box installations only.
Stovetop Adaptor (Starter Pipe) - Use to adapt
DuraBlack stovepipe to appliance flue outlet.
Tee with Clean-Out Cap - Use with rear exit appliances
and appliances that require a barometric damper.
Trim Collar - Use as a decorative Trim Collar for
DuraBlack connection to chimney.
Telescoping Length - Use for a two-piece installation.
Connects directly from stove to ceiling support box or finishing
collar. Adjusts from 44”- 68”. No cutting required.